Today we are going to make a project which will detect the preset water level and when water is reached to this level it will generate a sound.
The objective of Water Level Alarm Circuit is to generate a sound with the help of buzzer when a water level in a tank reached to its preset level (Predefined mark).
Following are the required components for making water level alarm circuit:
- IC NE555 (Timer IC)
- Resistors: R1 = 1K; R2 = 100K;
- Capacitor: C1 = 2.2uF (15V)
- 3V DC battery
Description of Water Level Indicator
Here is the simple water level alarm circuit using 555 timer IC which will produce an audible sound when the water level reaches to its preset level. This circuit uses 3V DC power supply. Therefore this circuit is quite handy to use.
This circuit of water level alarm is based on the astable multivibrator which is wired around IC1 (NE555). The operating frequency of this astable multivibrator depends upon the values of capacitor C1, resistors R1 and R2 and the resistance across probes at A and B. when there is no water up to the level of probes, because of open circuit astable multivibrator will not produce any oscillations hence the circuit will not produce sound. When the water reaches the level of probes, the circuit will be completed and some current flows through the water. Thus astable multivibrator produces oscillations proportional to the values of C, R1, R2 and the resistance across the probes. Now the buzzer will beep to indicate that the water is reached to its preset level.
- Probes can be made of two insulated copper or aluminum wires.
- Preset level means the level that you want to detect the water in the tank.
- Place the probes to a preset level, so that it will close the path and generates sound using the buzzer.
You may also like
- Temperature controlled DC fan using thermistor (mini project)
- Clap Switch Circuit mini project
- Digital clock using 8051 microcontroller and LCD display – mini project
- Digital Thermometer using 8051 microcontroller – mini project
- Digital Voltmeter using 8051 microcontroller – Mini-Project
If you like this article, please share it with your friends and like or facebook page for future updates. Subscribe to our newsletter to get notifications about our updates via email. If you have any queries, feel free to ask in the comments section below. Have a nice day!